What you'll need: - A new spare part 220/10 - A flathead screwdriver Instructions: 1. With the help of a flathead screwdriver, press against the edges of the shock absorber and then pull it off 2. Using a screwdriver, patiently insert the new shock absorber following a circular motion
What you'll need: - A 13 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - FELCO 903 Sharpener - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add...
What you'll need: - A FELCO 903 sharpener Instructions: 1- Sharpen your tool: Place the sharpener while maintaining a 23-degree angle on the edge side of the blade and make circular motions from the base of the blade toward the tip. Place the sharpener on the other side of the...
What you'll need: - A new spare part 231/4 - Phillips screwdriver nr 1 Instructions: 1- Remove the old anvil blade 2- Place the new anvil blade: The screws have different lengths. The shorter screw must hold the blade and the anvil-blade, and the longer screw must hold the anvil-blade...
How to change the shock absorbers on your FELCO lopper
What you'll need: - A new spare part 220/10 - A flathead screwdriver Instructions: 1. With the help of a flathead screwdriver, press against the edges of the shock absorber and then pull it off 2. Using a screwdriver, patiently insert the new shock absorber following a circular motion
How to clean your FELCO 231 loppers
What you'll need: - A 13 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - FELCO 903 Sharpener - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add...
How to sharpen a FELCO pruning shears for left-handed
What you'll need: - A FELCO 903 sharpener Instructions: 1- Sharpen your tool: Place the sharpener while maintaining a 23-degree angle on the edge side of the blade and make circular motions from the base of the blade toward the tip. Place the sharpener on the other side of the...
How to clean and service your FELCO 6 pruning shears
What you'll need: - FELCO 905 multifunctional tool - A dry rag - Scotch-Brite - FELCO 990 grease - Adjustement key 2/30 - Lubricating oil (sewing machine oil) - FELCO 903 sharpener - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag...
How to change the anvil blade of your FELCO 231
What you'll need: - A new spare part 231/4 - Phillips screwdriver nr 1 Instructions: 1- Remove the old anvil blade 2- Place the new anvil blade: The screws have different lengths. The shorter screw must hold the blade and the anvil-blade, and the longer screw must hold the anvil-blade...