Carregando...

FELCO ELITE

Aprende Mais

Elevar a experiência de corte FELCO

Aprende Mais

A FELCO amplia a sua gama de
equipamentos de proteção individual (EPI)

Aprende Mais

Gama de jardinagem FELCO

Aprende Mais

Novas tesouras de sebes FELCO

Aprende Mais

Os nossos produtos

How to change the coating on your FELCO pruning shear

How to change the coating on your FELCO pruning shear

What you'll need: - A new spare handle grip - Proctective gloves - A cutter - Sandpaper - Some hot water (100°/212 °F) - Quick drying glue for metals - A flathead screwdriver Instructions: 1. Wear protective gloves 2. Remove the old red coating with the help of a cutter...

How to clean and service your FELCO 31 pruning shears

How to clean and service your FELCO 31 pruning shears

What you'll need: - A 14 mm wrench - A 13 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - Lubricating oil (sewing machine oil) - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each...

How to change the shock absorbers on your FELCO pruning shears

How to change the shock absorbers on your FELCO pruning shears

What you'll need: - A new spare part 2/18 and 2/20 - A FELCO pocket knife - A flathead screwdriver Instructions: 1. Disassemble your tool 2. Remove the shock absorber always with the help of a screwdriver (Be careful not to drop the ring inside the insert) 3. With the...

How to change the anvil blade of your FELCO 231

How to change the anvil blade of your FELCO 231

What you'll need: - A new spare part 231/4 - Phillips screwdriver nr 1 Instructions: 1- Remove the old anvil blade 2- Place the new anvil blade: The screws have different lengths. The shorter screw must hold the blade and the anvil-blade, and the longer screw must hold the anvil-blade...

How to change the locking closure of you FELCO folding saw

How to change the locking closure of you FELCO folding saw

What you'll need: - Phillips screwdriver nr 1 - A hammer - A 2.5mm drift punch - A spare part 601/10 Instructions: 1- Disassemble the old locking closure by removing the pin using the drift punch and the hammer 2- Insert the new locking closure and secure it by inserting...