Loading...

FELCO 31

One-hand pruning shear - Good performance - Anvil model

The anvil pruning shears / secateurs that take no prisoners when cutting through hard or dead wood. The ultra-sharp FELCO 31 will prove to be your greatest ally whether you are a left or right-hander. Once you hold the trademark FELCO comfort, you will find no reason to stop as these anvil pruners exhibit high cutting efficiency. Large diameter hard or dead wood, or smaller general pruning tasks can be taken on with ease.

Diameter
  • 25.00mm
  • 0.98inch
Weight
  • 225g
  • 0.50lb
Length
  • 210.00mm
  • 8.27inch
Hand size
  • Large hand
$58.33
Klarna.
4 interest-free payments of $14.60
Made in Switzerland
30 days return
*Lifetime warranty

Description

The unique profile of the FELCO 31 anvil pruner is evidence of the considerable research and knowledge that lies behind its evolution. It is also suggests a tool more than able to cope with any pruning challenge that confronts it. The extremely sharp straight cutting blade is bevelled on both sides and is highly-efficient in making large cuts through either hard, dead or sappy wood. The FELCO 31 is the rugged anvil pruner with attitude, for left and right-handed users who are not going to let anything stand in their way.

SELECT YOUR PART

  • 2/13
    Thumb catch spring washer
  • 2/14
    Thumb catch screw
  • 30/1
    Complete handle assembly without blade
  • 30/11
    Nickel plated spring
  • 30/12
    Thumb catch
  • 30/25
    Washer
  • 30/3
    Blade with washer
  • 30/4
    FOR FELCO 30 ONLY (NOT FOR FELCO 31 or 32)
  • 30/8
    Bolt
  • 30/9
    Nut
  • 30/90
    Kit: bolt and nut
  • 30/91
    Kit: 2 springs
  • 30/92
    Kit: complete thumb catch assembly
  • 31/13
    Washer
  • 31/2
    Complete handle assembly without anvil
  • 31/4
    Anvil with screws
  • 31/6
    Screw for anvil 6 mm
  • 31/7
    Screw for anvil 8 mm
  • 6/35
    Blade handle grip
  • 7/10
    Bushing
  • 7/36
    Counter blade handle grip
  • 7/5B
    Blade rivet

FELCO 31

2/13
Thumb catch spring washer
1x 2/13
$0.63
  • The ultra-sharp blade cuts easily through large diameters which ensures you can make the most of any pruning session
  • Blade to anvil contact makes for easier pruning of hard, dead and sappy wood that delivers the convenience of efficient all-round capability
  • The large cutting blade is bevelled on both sides so you can rely on exceptional clean-cut pruning every time
  • The one piece forged aluminium handle ensures your FELCO tool is robust enough for heavy-duty pruning
  • Rely on FELCO proprietary heat treating and hardening know-how to provide you with a long lasting ultra-sharp cutting edge
  • Enjoy comfortable and safe pruning with the ergonomic cushioned, non-slip, phthalate-free handle grips*
  • The closing lock makes for safe pick up and transit wherever your pruning takes you
  • The quick and easy blade and anvil change are safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and spring to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon, so you can always find your FELCO tool in any environment
  • Made in Switzerland using 100% renewable energy


*Phthalates are known to be potential endocrine disruptors, FELCO has been producing phthalate-free products since 2015

N°1  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 31  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 31  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 31  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 31  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
FELCO 31  - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
FELCO 31  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.