FELCO 32

One-hand pruning shear - Good performance - Curved anvil model
Reliable: comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade made of high-quality hardened steel and screw-mounted adjustable brass curved anvil (1) / clean, precise cut / all parts can be replaced Efficient: easy cutting adjustment (2) Ergonomic: hand protection is provided by the ideal shape of the handles / non-slip coating
Diameter
  • 25.00mm
  • 0.98inch
Weight
  • 260g
  • 0.57lb
Length
  • 210.00mm
  • 8.27inch
Hand size
  • Large hand
$56.73
Made in Switzerland
*Lifetime guarantee

Description

The curve of the FELCO 32’s brass anvil blade allow you to access your chosen branch with all the precise positioning you would expect from the fine tapered cutting head. Once held in the jaws there is no escape for branches up to 25mm, which are safely gripped close to the centre of the curved shape blade of these robust pruning shears. There is no slipping when you make the precise clean cut, just a feeling of confident control and power. The FELCO 32 is an ideal companion for right or left-hand cutting through hard, dense wood.

SELECT YOUR PART

  • 2/13
    Thumb catch spring washer
  • 2/14
    Thumb catch screw
  • 30/11
    Nickel plated spring
  • 30/12
    Thumb catch
  • 30/25
    Washer
  • 30/8
    Bolt
  • 30/9
    Nut
  • 30/90
    Kit: bolt and nut
  • 30/91
    Kit: 2 springs
  • 30/92
    Kit: complete thumb catch assembly
  • 31/13
    Washer
  • 31/6
    Screw for anvil 6 mm
  • 31/7
    Screw for anvil 8 mm
  • 32/1
    Complete handle assembly without blade
  • 32/2
    Complete handle assembly without anvil
  • 32/3
    Blade with washer
  • 32/4
    Anvil with screws
  • 6/35
    Blade handle grip
  • 7/10
    Bushing
  • 7/36
    Counter blade handle grip
  • 7/5B
    Blade rivet

FELCO 32

2/13
Thumb catch spring washer
1x 2/13
$0.53
  • The ultra-sharp blade cuts easily through large diameters which ensures you can make the most of any pruning session
  • The fine tapered cutting head enables easy access and greater reach to make pruning branches safe and efficient
  • Blade to anvil contact makes for easier pruning of hard, dead and sappy wood that delivers the convenience of all-round capability
  • The curved cutting blade is forged so you can rely on exceptional clean-cut pruning every time
  • The one piece forged aluminium handle ensures your FELCO tool is robust enough for heavy-duty pruning
  • Rely on FELCO proprietary heat treating and hardening know-how to provide you with a long lasting cutting edge
  • Enjoy comfortable and safe pruning with the ergonomic cushioned grips and non-slip phthalate-free handle grips*
  • The closing lock makes for safe pick up and transit wherever your pruning takes you
  • The quick and easy blade and anvil change is safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and spring to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon, so you can always find your FELCO tool in any environment
  • Made in Switzerland using 100% renewable energy


*Phthalates are known to be potential endocrine disruptors, FELCO has been producing phthalate-free products since 2015

N°1  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 32  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 32  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 32  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 32  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
FELCO 32  - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
FELCO 32  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.