FELCO 11

One-hand pruning shear - High performance - Classic, new generation

If precision cutting and durability are high on your agenda then these pruning shears /secateurs will tick the box, and will no doubt satisfy your requirements in so many more ways. The ergonomic FELCO 11 pruning shears are a delight to use, easy to manoeuvre, while maintaining their scalpel-sharp and precise cutting edge for a long time. The proven FELCO 11 handle design is easy to grip in hands of all sizes thanks to the contoured finger grips. 


Download our hand sizing chart in the documentation section below.

Diameter
  • 25.00mm
  • 0.98inch
Weight
  • 245g
  • 0.54lb
Length
  • 210.00mm
  • 8.27inch
Hand size
  • Large hand
Sorry, this product is temporarily out of stock!
Made in Switzerland
30 days back

Description

If you have ever used our iconic FELCO 2 shears / secateur you will know what to expect. If you haven’t, then the high performance of the FELCO 11 – which take their design inspiration from our celebrated iconic standard-bearer, is sure to impress. Refined excellence is expressed in every feature, however, this is no heritage model as the FELCO 11 is a new classic cutting its own path. Pass them from hand-to-hand to feel the superb balance, the ergonomic form and contoured finger grips, and test the large cutting capacity designed for all types of pruning. The narrow counter blade gets you to those awkward branches and assures a close cut. You’ll never get tired of using them - as rubber shock absorbers ensure smooth operation and lessen fatigue. Tradition refined in a new ergonomic design… 

SELECT YOUR PART

  • 11/1
    Complete handle assembly without blade
  • 11/2
    Complete handle assembly without counter blade
  • 11/4
    Counter blade with screw
  • 2/10
    Bushing
  • 2/11
    Nickel plated spring
  • 2/12
    Thumb catch
  • 2/13
    Thumb catch spring washer
  • 2/14
    Thumb catch screw
  • 2/15
    Base plate
  • 2/16
    Toothed segment
  • 2/18
    Bumper
  • 2/19
    Crimped ring
  • 2/20
    Shock absorber
  • 2/3
    Blade
  • 2/3-1
    Kit: blade, spring, adjustment key
  • 2/30
    Adjustment key
  • 2/35
    Blade handle grip
  • 2/36
    Counter blade handle grip
  • 2/5B
    Blade rivet
  • 2/9
    Toothed nut
  • 2/91
    Kit: 2 springs
  • 2/92
    Kit: complete thumb catch assembly with plate, shock absorber
  • 2/92B
    Kit: complete two position thumb catch assembly
  • 2/93
    Shock absorber assembly
  • 6/6
    Counter blade screw
  • 6/7
    Screw for toothed segment
  • 6/8
    Bolt
  • 6/90
    Kit: bolt and nut
  • 6/94
    Kit: bolt/nut

FELCO 11

11/1
Complete handle assembly without blade
1x 11/1 + 3x 2/5B + 1x 2/19 + 1x 2/20 + 1x 2/10 + 1x 2/13 + 1x 2/12 + 1x 2/14 + 1x 2/35
$19.79
  • Rugged and extreme reliability – due to the forged aluminium and hardened steel construction - ensures you can approach any pruning job with confidence 
  • Easily adjust the cutting head for a clean and precise cut that promotes quick healing of the pruning wound
  • Enjoy comfortable and safe pruning with the ergonomic cushioned, non-slip, phthalate-free handle grips*
  • The fine geometry of the counter blade makes precision pruning routine with every cut you make
  • The sap groove prevents the blade from sticking and improves cutting efficiency
  • Keep cutting for longer as rubber shock absorbers increase your handling comfort and reduce fatigue
  • The quick and easy blade change is safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and spring to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon
N°1  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 11  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 11  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 11  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 11  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
FELCO 11  - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the blade
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o
FELCO 11  - Changing the blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
FELCO 11  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Changing the thumb catch
When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.
FELCO 11  - Changing the thumb catch

The videos do not necessarily show the chosen tool. But the handling is the same.