Loading...

FELCO 210A-50

SPARE PARTS ONLY

THIS ITEM IS DISCONTINUED. SEE BELOW FOR SPARE PARTS. 

Diameter
  • 35.00mm
  • 1.38inch
Weight
  • 735g
  • 1.62lb
Length
  • 500.00mm
  • 19.69inch
Sorry, this product is temporarily out of stock!
Made in Switzerland

Description

The FELCO 210A-50 loppers have a curved cutting head that is as seductive to the eye as it is practical and efficient. Wood is held; wood doesn’t slip; wood is clean cut with FELCO precision. FELCO has been building a tradition of cutting quality for 72 years and our products are renowned for being robust, with the FELCO 210A-50, it is easy to see that they are rugged, lightweight, and easy on the wrists while providing exceptional cut quality.  

SELECT YOUR PART

  • 2/16
    Toothed segment
  • 2/30
    Adjustment key
  • 20/10
    Shock absorber
  • 20/11
    Screw for toothed segment
  • 20/5
    Pin
  • 20/7
    Nut
  • 20/8
    Bolt
  • 20/9
    Toothed nut
  • 20/93
    Kit: shock absorber
  • 20/94
    Kit: nut, bolt
  • 200/35
    Grips
  • 200/37
    Junction
  • 200/6
    Screw
  • 200A/32
    2 Complete handle assemblies - 32 cm (12.6 in.)
  • 210/3
    Blade
  • 210/4
    Counter blade

FELCO 210A-50

2/16
Toothed segment
1x 2/16
$1.87
  • The curved cutting head reduces your effort and makes pruning safer and more efficient
  • An extremely rugged and durable design makes the FELCO 210A-50 are a dependable choice regardless of what you ask of them
  • The ultra-sharp blade cuts easily through larger pieces of wood which ensures you can make the most of any pruning session
  • Handles with forged aluminium junctions ensure your FELCO tool is robust enough for the heaviest-duty pruning
  • Interchangeable low weight aluminium tube handles - available in three lengths of 40, 50, and 60 cm/ 15.7, 19.6 and 23.6 inches – adjust your reach as required and add convenience, making this the only tool you will need to carry
  • Rely on FELCO proprietary heat treating and hardening know-how to provide you with a long lasting ultra-sharp cutting edge
  • Easily adjust the cutting head for a clean and precise cut that promotes quick healing of the pruning wound
  • Enjoy comfortable and safe pruning with the ergonomic, cushioned, non-slip, phthalate-free handle grips*
  • Keep cutting for longer as rubber shock absorbers increase your handling comfort and reduce fatigue
  • The sap groove prevents the blade from sticking and improves cutting efficiency
  • The quick and easy blade change is safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and counter blade to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon, so you can always find your FELCO tool in any environment
  • Made in Switzerland using 100% renewable energy  


*Phthalates are known to be potential endocrine disruptors, FELCO has been producing phthalate-free products since 2015

N°1  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 210A-50  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 210A-50  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 210A-50  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 210A-50  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the blade
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o
FELCO 210A-50  - Changing the blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
FELCO 210A-50  - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them.
FELCO 210A-50  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Changing the shock absorbers
When the tool closes too abruptly during pruning the shock absorbers should be changed.
FELCO 210A-50  - Changing the shock absorbers

The videos do not necessarily show the chosen tool. But the handling is the same.