Loading...

FELCO 5

One-hand pruning shear - Good performance - Basic model

Don’t be confused by the simpler, refined profile of these pruning shears / secateurs as there is nothing basic about this tool. The FELCO 5’s heavy duty steel handles deliver all the necessary power when a precise cut is a key requirement, while the tapered cutting head gives you all the help you need to reach effectively between branches. 


Download our hand sizing chart in the documentation section below.

Diameter
  • 25.00mm
  • 0.98inch
Weight
  • 310g
  • 0.68lb
Length
  • 225.00mm
  • 8.86inch
Hand size
  • Large hand
Made in Switzerland

Description

It’s easy to see the quality and ruggedness of these pruning shears at a glance. The FELCO 5’s blade and anvil blade are of high-quality steel construction, with the sort of powerful precision that can handle large branches and deliver a quick, clean cut. The distinctive tapered cutting head gives greater reach between branches to safely establish your target when pruning. You will find them particularly suitable if you have large hands and be able to undertake all types of pruning tasks, while comfortable in the knowledge that all parts are replaceable.

SELECT YOUR PART

  • 4/9
    Nut
  • 5/11
    Nickled spring
  • 5/13
    Complete handle assembly without blade
  • 5/15
    Complete handle assembly without counter blade
  • 5/3
    Blade
  • 5/35
    Grip
  • 5/5B
    Blade rivet
  • 5/8
    Bolt
  • 5/91
    Kit: 2 springs
  • 5/94
    Kit: bolt/nut

FELCO 5

4/9
Nut
1x 4/9
N°1  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 5  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 5  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 5  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 5  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the blade
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o
FELCO 5  - Changing the blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
FELCO 5  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Changing the shock absorber
When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.
FELCO 5  - Changing the shock absorber

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Changing the thumb catch
When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.
FELCO 5  - Changing the thumb catch

The videos do not necessarily show the chosen tool. But the handling is the same.