FELCO 7

One-hand pruning shear - High performance - Ergonomic

It’s the revolving handle that makes these pruning shears / secateurs so distinctive, reducing the effort required in use to improve your comfort and make cutting easier. The FELCO 7 is a powerful and ergonomically-designed tool that is particularly suitable for anyone with larger hands and is at its very best when tackling heavy-duty, intensive pruning tasks or for those who want to maximize their cutting power with minimum effort. 


Download our hand sizing chart in the documentation section below.

Diameter
  • 25.00mm
  • 0.98inch
Weight
  • 290g
  • 0.64lb
Length
  • 210.00mm
  • 8.27inch
Hand size
  • Large hand
CA$101.40
Made in Switzerland
*Lifetime guarantee

Description

You can be confident you hold the power to succeed with the FELCO 7, even when faced with the most demanding pruning tasks. The revolving handle moves on its axis with you, distributing your efforts over all the muscles in your hand as you work. This reduces the cutting force you require to achieve those larger cuts by about 30%. This in turn reduces fatigue and blisters; and in tandem with the angled cutting head - which feels as if it is a natural part of your hand – provides even more comfort in operation. A fact which is only enhanced by the smooth working pleasure from the rubber shock absorbers that ensure protection against wrist strain. The micro-metric setting mechanism allows for the easy adjustment of the cutting head for a precision pruning cut.

SELECT YOUR PART

  • 2/11
    Nickel plated spring
  • 2/12
    Thumb catch
  • 2/13
    Thumb catch spring washer
  • 2/14
    Thumb catch screw
  • 2/15
    Base plate
  • 2/16
    Toothed segment
  • 2/18
    Bumper
  • 2/19
    Crimped ring
  • 2/20
    Shock absorber
  • 2/30
    Adjustment key
  • 2/9
    Toothed nut
  • 2/91
    Kit: 2 springs
  • 2/92
    Kit: complete thumb catch assembly with plate, shock absorber
  • 2/92B
    Kit: complete two position thumb catch assembly
  • 2/93
    Shock absorber assembly
  • 7/1
    Complete handle assembly without blade
  • 7/10
    Bushing
  • 7/22B
    Rotating handle
  • 7/23
    Rotating handle axel
  • 7/2B
    Complete handle assembly without counter blade
  • 7/3
    Blade
  • 7/3-1
    Kit: blade, spring, adjustment key
  • 7/36
    Counter blade handle grip
  • 7/4
    Counter blade with screw
  • 7/6
    Counter blade screw
  • 7/7
    Screw for toothed segment
  • 7/8
    Bolt
  • 7/90
    Kit: bolt and nut
  • 7/94
    Kit: bolt/nut

FELCO 7

2/11
Nickel plated spring
only available as pack of two in kit 2/91
  • A revolving handle spreads the pruning effort required, reducing the cutting force required to help protect your joints and muscles
  • Lightweight forged aluminium handles with a lifetime guarantee provide for efficient handling no matter the location or task
  • A robust and rugged high performance tool with a design that makes it easy to deal comfortably with heavy-duty, intensive pruning tasks
  • The angled head integrates the tool’s function with your hand for a comfortable cutting action that becomes second nature
  • Rely on FELCO proprietary heat treating and hardening know-how to provide you with a long lasting ultra-sharp cutting edge
  • Enjoy comfortable and safe pruning with the ergonomic cushioned, non-slip, phthalate-free handle grips*
  • The sap groove prevents the blade from sticking and improves cutting efficiency
  • The wire cutting notch in the blade provides for every eventuality and avoids the temptation to risk blunting your tool 
  • Easily adjust the cutting head for a clean and precise cut that promotes quick healing of the pruning wound
  • Keep cutting for longer as rubber shock absorbers increase your handling comfort and reduce fatigue
  • The quick and easy blade change is safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and spring to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon, so you can always find your FELCO tool in any environment
  • Made in Switzerland using 100% renewable energy
N°1  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 7  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 7  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 7  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 7  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
FELCO 7  - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the blade
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o
FELCO 7  - Changing the blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
FELCO 7  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Dismantling the revolving handle
It is advisable to dismantle the revolving handle on a regular basis, so that it does not become jammed.
FELCO 7  - Dismantling the revolving handle

The videos do not necessarily show the chosen tool. But the handling is the same.

N°5  Changing the thumb catch
When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.
FELCO 7  - Changing the thumb catch

The videos do not necessarily show the chosen tool. But the handling is the same.