Loading...

FELCO 200A-40

Two-hand pruning shear - Length 40 cm (15.7 in.) - STRAIGHT cutting head

Never judge a FELCO tool by its size. This is a small, lightweight, easily transported lopper that thinks and acts big, without ever sacrificing FELCO’s trademark precision - here enhanced by the option of interchangeable handles. The FELCO 200A-40 lopper dispels any considerations of size you might have as quickly and easily cuts through a 35mm / 1.18 inch branch.  

Diameter
  • 35.00mm
  • 1.38inch
Weight
  • 665g
  • 1.47lb
Length
  • 400.00mm
  • 15.75inch
Made in Switzerland

Description

Power and precision are the outstanding qualities of the lightweight and robust FELCO 200A-40 loppers. Once you have decided to make a cut the outcome is never in doubt, especially as the tenacious toothed counter blade grips the wood into the cutting head. The adjustable, straight tapered cutting head gives you the precision access that is essential to reach between those awkward outgrowths. The distinctive capabilities of the FELCO 200A-40 lopper are boosted by interchangeable handles. Rapidly switch the three tubes available – up to an optimum length of 60cm / 23.6- to extend the tool’s reach and leverage to stay in command of the toughest pruning. Comfort comes from the rubber shock absorbers which cushion your wrists as you go for cutting the bigger branches. 

SELECT YOUR PART

  • 20/10
    Shock absorber
  • 20/5
    Pin
  • 20/7
    Nut
  • 20/8
    Bolt
  • 20/93
    Kit: shock absorber
  • 20/94
    Kit: nut, bolt
  • 200/3
    Blade
  • 200/35
    Grips
  • 200/37
    Junction
  • 200/4
    Counter blade
  • 200/6
    Screw
  • 200A/22
    2 Complete handle assemblies - 22 cm (8.7 in.)
  • 200A/42
    2 Complete handle assemblies - 42 cm (16.5 in.)

FELCO 200A-40

20/10
Shock absorber
1x 20/10
  • The fine tapered cutting head enables easy access and greater reach to make pruning branches safe and efficient
  • Precision pruning and cutting to a point makes the FELCO 200A-40 loppers ideal for the fine detail and ensures you get the job done first time
  • An extremely rugged and durable design makes these loppers the dependable choice regardless of what you ask of them
  • The ultra-sharp blade cuts easily through larger pieces of wood which ensures you can make the most of any pruning session
  • The toothed anvil blade keeps wood just where you want it to ensure your pruning is an efficient and comfortable experience
  • Handles with forged aluminium junctions ensure your FELCO tool is robust enough for the heaviest-duty pruning
  • Interchangeable low weight aluminium tube handles - available in three lengths of 40, 50, and 60 cm/ 15.7, 19.6 and 23.6 inch – adjust your reach as required and add convenience, making this the only tool you will need to carry
  • Rely on FELCO proprietary heat treating and hardening know-how to provide you with a long lasting ultra-sharp cutting edge
  • Easily adjust the cutting head for a clean and precise cut that promotes quick healing of the pruning wound
  • Enjoy comfortable and safe pruning with the ergonomic, cushioned, non-slip, phthalate-free handle grips*
  • Keep cutting for longer as rubber shock absorbers increase your handling comfort and reduce fatigue
  • The sap groove prevents the blade from sticking and improves cutting efficiency
  • The quick and easy blade change is safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and counter blade to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon, so you can always find your FELCO tool in any environment
  • Made in Switzerland using 100% renewable energy   


*Phthalates are known to be potential endocrine disruptors, FELCO has been producing phthalate-free products since 2015

N°1  Dismantling
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
FELCO 200A-40  - Dismantling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Oiling
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
FELCO 200A-40  - Oiling

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Sharpening
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
FELCO 200A-40  - Sharpening

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Cleaning
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
FELCO 200A-40  - Cleaning

The videos do not necessarily show the chosen tool. But the handling is the same.

N°1  Changing the blade
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o
FELCO 200A-40  - Changing the blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2  Changing the anvil-blade
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
FELCO 200A-40  - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3  Changing the plastic coatings for handles
If the coatings are badly damaged, you can replace them.
FELCO 200A-40  - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4  Changing the shock absorbers
When the tool closes too abruptly during pruning the shock absorbers should be changed.
FELCO 200A-40  - Changing the shock absorbers

The videos do not necessarily show the chosen tool. But the handling is the same.